waste-incinerator

Medical Waste Shredder    Capacity: Should be 150 liters.  Should be capable to shred up to 100 liters of the treated waste. 7  The technology should be…

All particles of the waste should achieve a high level of sterilization and not just “disinfection” due to the continuous agitations Description of the Treatment Cycle of the processor i)…

The incinerator plant shall incorporate a control panel for its operation. On the control panel we shall have a visual display of the chamber temperatures. This visual display must control…

The burners shall comply with the requirements of BS 799 or DIN Standards. Each shall be the packed type and incorporate automatic stop/start programmed timer control, flame failure equipment and…

The incinerator to be fully assembled wired and logic function tested in the factory, prior to dispatch.   –      One high flue gas temperature indicator/alarm to provide an audio/visual warning…

“PYROLYTIC” combustion, by controlling the gasification of waste The incinerator manufacturer must avoid the release of black smoke and fine dust, during the loadings. It shall be able to reduce…

The incinerator shall be provided with a range of interconnecting ductwork between the thermal reactor outlet and the inlet of the chimney. This ductwork shall consist of refractory lined tubes…

The incinerator shall be equipped with water injection nozzle connection. If the temperature in the primary chamber should rise too high (normal temperature between 300 and 800?C) during the operating…

1) Policy – Waste disposal management shall be taken special note to prevent hospital infection. – Infections wastes shall be managed, stored strictly and burned by a incinerator located at hospital…

———————————–   Failure to establish the authenticity of the certificate the bidder is liable to render the bid non-responsive and bidder open to action in the line with applicable regulations…